Battery Pack Data Properties

Attribute	Data Type	Description
packType	int	Not used
socLevel	int	Battery charge level
state	int	0: Standby, 1: Charging, 2: Discharging
power	int	Battery pack power
maxTemp	int	Maximum battery temperature (maxTemp) is stored as one-tenth of the Kelvin temperature. The conversion formula to Celsius (°C) is: float maxTemp_Celsius = (maxTemp - 2731) / 10.0; // Unit: °C
totalVol	int	Total voltage
batcur	int	Total current, stored as a 32-bit integer where the upper 16 bits are sign-extended. The conversion formula is: batcur_actual = ((int16_t)batcur) / 10.0; // Unit: A
maxVol	int	Maximum cell voltage, stored in units of 0.01V. The conversion formula to actual voltage: maxVol / 100.0 (Unit: V)
minVol	int	Minimum cell voltage, stored in units of 0.01V. The conversion formula to actual voltage: minVol / 100.0 (Unit: V)
softVersion	int	Software version

Device Data Properties - Read-Only

Attribute	Data Type	Description
heatState	int	0: Not heating, 1: Heating
packInputPower	int	Battery pack input power (discharging)
outputPackPower	int	Output power to battery pack (charging)
outputHomePower	int	Output power to home electricity
remainOutTime	int	Remaining discharge time (unit: minutes)
packState	int	0: Standby, 1: Charging, 2: Discharging
packNum	int	Number of battery packs
electricLevel	int	Average battery pack charge level
gridInputPower	int	Grid input power
solarInputPower	int	Total solar input power
solarPower1	int	Solar line 1 input power
solarPower2	int	Solar line 2 input power
pass	int	0: No, 1: Yes
reverseState	int	0: No, 1: Reverse flow
socStatus	int	0: No, 1: Calibrating
hyperTmp	int	Enclosure temperature
dcStatus	int	0: Stopped, 1: Battery input, 2: Battery output
pvStatus	int	0: Stopped, 1: Running
acStatus	int	0: Stopped, 1: Grid-connected operation, 2: Charging operation
dataReady	int	0: Not ready, 1: Ready
gridState	int	0: Not connected, 1: Connected
FMVolt	int	Voltage activation - Voltage value
socLimit	int	0: Normal state, 1: Charge limit reached, 2: Discharge limit reached

Device Data Properties - Read/Write

Attribute	Data Type	Description
writeRsp	N/A	Read/write response acknowledgment
acMode	int	1: Input, 2: Output
inputLimit	int	AC charging power limit
outputLimit	int	Output power limit
socSet	int	700-1000: 70%-100%
minSoc	int	0-500: 0%-50%
gridReverse	int	0: Disabled, 1: Allowed reverse flow, 2: Forbidden reverse flow
inverseMaxPower	int	Maximum output power limit
gridStandard	int	Grid connection standard 0: Germany 1: France 2: Austria