Battery Pack Data Properties

Friendly name (German)	Attribute	Example Value	Data Type	Description
Ladezustand	socLevel	19%	int	Battery charge level
Gesundheitszustand	soh	99,6%	int	State of Health
Status	state	Laden	int	0: Standby, 1: Charging, 2: Discharging
Leistung	power	34W	int	Battery pack power (charge/discharge direction depends on state)
Höchste Zelltemperatur	maxTemp	21,0 C	int	Maximum battery temperature (maxTemp)
Gesamtspannung	totalVol	49V	int	Total voltage
Höchste Zellspannung	maxVol	3,25V	int	Maximum cell voltage, stored in units of 0.01V. The conversion formula to actual voltage: maxVol / 100.0 (Unit: V)
Niedrigste Zellspannung	minVol	3,24V	int	Minimum cell voltage, stored in units of 0.01V. The conversion formula to actual voltage: minVol / 100.0 (Unit: V)
BMS Firmware	softVersion	v2.0.31	int	Software version BMS

Read Only attributes

Friendly Name (German)	Example Value	Attribute	Description
Akku entladen	0,09 kWh	aggr_discharge_total	daily amount discharged energy
Akku geladen	0,02 kWh	aggr_charge_total	daily amount charged energy
Ausgangsleistung	9 W	output_home_power	Output power to home electricity
Batterieanzahl	2	pack_num	Number of battery packs
Batterie Ausgangsleistung	0 W	pack_input_power	Battery pack input power (discharging)
Batterie Eingangsleistung	58 W	output_pack_power	Output power to battery pack (charging)
Batterieladezustand	23 %	electric_level	Average battery pack charge level
blueOta	1	blue_ota	?
Bypass	Aus	pass	"0": "Aus", "1": "An", "2": "Automatisch An"
Energieplan	keiner	auto_model	"0": "Keiner", "6": "Akkuprioritätsmodus", "7": "Terminmodus", "8": "Intelligenter Abgleichmodus", "9": "Smart-CT-Modus", "10": "Strompreis"
Hardware Version	not provided	masterhaer_version	?
Hauptschalter	Ein	master_switch	?
Heizung	Aus	heat_state	0: Aus, 1: Ein
HEMS-Status	Aus	hems_state	?, SF1200 is Not Supported by hems
Hub-Status	Output stoppen und ausschalten	hub_state	What happens if lower loading limit is reached; 1: Output stoppen und Abschalten (Stop and switch off; 0: Output stoppen und in Standby gehen (Stop and Standby
HubStatus	Laden	pack_state	1:Laden (Charge), 2:Entladen (Discharge), 0:Ruhezustand (Standby)
inputMode	0	input_mode	?
Master Firmware	v2.0.48	master_soft_version	Master Firmware Hub1200
Netzeingangsleistung	0 W	grid_power	?
Online	Aus	wifi_state	1: Ein/On, 0:Aus/Off
smartMode	0	smart_mode	?
smartPower	0	smart_power	?
SOC Status	0	soc_status	0: No, 1: Calibrating, should be 0 in SF1200, there is no calibration mode
socLimit	0	soc_limit	0: Normal state, 1: Charge limit reached, 2: Discharge limit reached
Solar	128 W	solar_input_power	Total solar input power
Solar-Energie erzeugt	0,07 kWh	aggr_solar_total	daily amount of produced solar energy
solarPower1	23 W	solar_power1	Solar line 1 input power
solarPower2	105 W	solar_power2	Solar line 2 input power
switchCount	5	switch_count	a sensor which detects a change between chargin, discharging and idle.
Verbindungsstatus	Verbunden	connection_status	"0": "Unbekannt", "1": "Verbunden", "2": "HEMS", "3": "Keine Sicherungsgruppe"
Verbleibende Entladezeit	999 Std.	remain_out_time	Remaining discharge time (unit: minutes)
Verbleibende Ladezeit	999 Std.	remain_input_time	Remaining charge time (unit: minutes)
Verfügbare Energie	0,6 kWh	available_kwh	available capacity of batterie-stack
Wechselrichtereingang	700 W	inverse_max_power	Maximum output power limit
Wechselrichtermarke	3	pv_brand	"1": "Hoymiles", "2": "Enphase", "3": "APsystems", "4": "Anker", "5": "Deye", "6": "BossWerk", "7": "TSun", "8": "Sonstige"

Device Data Properties - Read/Write

Friendly Name (German)	Example Value	Attribut	Description
AC-Betriebsmodus	AC-Ausgangsmodus	ac_mode	AC-Ausgangsmodus / AC Eingangsmodus (SF1200 only AC-Ausgang is releant)
Ausgangslimit	660	output_limit	Maximum Output of Hub
Bestätigungston	on	buzzer_switch	buzzer activated On/off
Bypass-Modus	Automatisch	pass_mode	Automatisch, Immer An, Immer Aus
Bypass-Modus zurücksetzen	Aus	auto_recover	AN/on, Aus/off: after switching off Bypass (pass_mode), this switch defines if the "automatic" Bypass mode should be reactivated next day
Eingangslimit	0	input_limit	?
Geräte-Sicherungsgruppe	Sicherungsgruppe max. 800 W	fuse_group	"unused": "Nicht verwendet, Gerät hat keine Sicherungsgruppe", "owncircuit": "Gerät hat einen eigenen Stromkreis oder eine eigene Phase", "group800": "Sicherungsgruppe max. 800 W", "group1200": "Sicherungsgruppe max. 1200 W", "group2000": "Sicherungsgruppe max. 2000 W", "group2400": "Sicherungsgruppe max. 2400 W", "group3600": "Sicherungsgruppe max. 3600 W", a fuse group selection is necessary, if you would like to use the smart control function
Reset Verbindung		mqtt_reset	?
SoC Maximum	100	soc_set	Upper loading limit
SoC Minimum	16	min_soc	Lower loading limit
Verbindungsart	Cloud	connection	Cloud / Lokal